How to use an USB to RS232/RS485 adapter with the ACE-GTW-MB?
With WinSCP software https://winscp.net/eng/download.php
Connect to the ACE-GTW-MB
Open the file mbusd.conf
Comment with # the line:
- device = /dev/ttyACM0
add the line:
- device = /dev/ttyUSB0
Save and close.
Open again and check if configuration is right.
Restart the ACE-GTW-MB with the RS232/485 adapter connected to the USB port.
If you want to use again the ACE-GTW-MB with ACE PLC, return to the initial configuration in the mbusd.conf file.