How Can We Help?

Print

Attempting to restore an unusable HMI

 

  1. Unzip and copy all files (provide by us) to a USB disk (FAT-32 formatted)
  2. Behind HMI, DIP-switch 3 ON (all others OFF)
  3. Insert the USB-Disk in HMI
  4. Power on the HMI
  5. Wait about 1 mn the end (orange message)
  6. DIP-switch 1 ON (all others OFF)
  7. Remove USB-Disk
  8. Restart HMI
  9. Touch calibration: Press on each red cross
  10. DIP-switch 2 ON (all others OFF)
  11. Restart HMI
  12. With HMI-Tool, upload your project or an empty project
  13. All DIP-switch OFF