How Can We Help?

Print

How do I configure the TB03PWM010-35 3-in/3-out PWM to 0-10V converter?

 

It is sometimes useful to be able to connect the ACE PLC to a PWM to 0-10 V converter.

For…

  • control a frequency inverter via its 0-10 V input.
  • convert and scale an analogue value to a 0-10 V value
  • control any device with an analogue input

You can have 6 digital inputs, 3 digital outputs and 3 analog outputs with a ACE-11 and a TB03PWM010-35:

This converter is inexpensive for 3 analog outputs, well designed electronically by us and reliable. It has 15 connection terminals. You can buy it here.

ACE digital outputs connector

First, wire the  (+)  to the 24 VDC (+) to get a 24 VDC on digital output (not 5 VDC by default):

Outputs wiring description

  •  (+)  > VDC (+)
  •  (-)  > GND (-)
  •  OUTPUT  > DO NPN –

Wiring of the PWM converter

To ACE PLC (with NPN outputs)

ACE PLC has NPN outputs, not PNP. ACE returns its outputs to 0V when active.

TB03PWM010-35   ACE PLC
(PLC with NPN Outputs)
PWM 0V < > One of its digital output (NPN)
PWM 24V or 12V < > + 24 VDC or 12VDC (Same as the ACE PLC)
+24VDC < > + 24 VDC (Same as the ACE PLC)
GND < > GND – 0VDC (Same as the ACE PLC)

 

To any PLC (with PNP outputs)

TB03PWM010-35   Others PLC
(PLC with PNP outputs)
PWM 0V < > GND – 0VDC (Same as the PLC)
PWM 24V or 12V < > One of its digital output 12/24V (PNP)
+24VDC < > + 24 VDC (Same as the PLC)
GND < > GND – 0VDC (Same as the PLC)

 

The subroutine for easy integration

Here is the subroutine:

  • 3 “OutAna“, the values you want on the PWM 0-10V converter “0-10V OUT” analog outputs
  • 3 “OutBitPWM_” : the ACE outputs “OutBit” for the PWM 0-10V converter “PWM IN” inputs

You can import this subroutine (3PWM_To_3ANA.viofs) in your ACE PLC project.

The best value for the PWM signal frequency for this product is 1 kHz. We have set the “Period Length” to 1000 microseconds.

See “PWM – Pulse-width Modulation” page for more information on PWM if you wish to understand this function.

And we scale the values. The converter is lineare, so we need only 2 values for the Scale tool.

For PWM, we use a minimum “On Time” of about 2 microseconds.