Print

How to configure the Ethernet IP address of the CommandHMIs?

 

Each CommandHMI series has DIP switchs, each of which has its functions.

The HMI is in DHCP Client mode by defaut.

For set the time, luminance and IP address, follow this :

  • Power off the HMI
  • DIP switchs 1 and 3 to ON (see picture)
  • Power on the HMI

 

  • Set your parameters on the HMI screen
  • Power off the HMI
  • DIP switchs 1 and 3 to OFF

 

The other DIP switchs

Dip Switch 1 to 5 Function
ALL OFF Normal operating mode
1 ON Coordinate Calibration Mode (Touch)
2 ON Display of the firmware version
3 ON Mode terminal (Expert)
1 & 3 ON Ethernet IP / WiFi settings